Quote:
Originally Posted by BMW-ALPINA
You have to make custom wiring for the memory switch and the door pocket ambient light. Its not easy to explain over a single post, so I have to see if I can make a DIY guide.
Thanks! 
Yes, the OEM seats was not good at all. I really hated them. The seats are just a physical swap and coding (just code the seat module to the car and activate the different motors if they was set as not active).
The seat modules are identical for both passenger and driver seats. Therefore, the memory coding is available on the passenger side. You need pos+, neg-, beifahrer-LIN for the memory switch and custom coding.
Ill see if I can make a DIY for the retrofit. |
Oh, that's good news! I have no problems with TIS and wiring harnesses
. But I have not yet found the necessary encodings. Could you share or give a link, you can in private messages.
Thank you
To facilitate the creation of DIY, I am attaching the connection table I made