Quote:
Originally Posted by lockescow
you may not need to cut the entire nub off at all. maybe cut a small piece from the bottom of the loop just enough to clear the pin. I would add a magnet to the lid, just in case the lid doesn't stay closed without the pin in place, unless the lid push-in-out can stay closed and release without the pin locking mechanism...
|
Yep, only the end of the loop needs to be cut off. The magnet won't be required since it's held onto the car by another catch that you push the door to pop open and push again to latch. I don't know how to better describe this but it is completely functional for holding the door shut. This loop is only for the locking mechanism and can be cut off.