|
Pat, love the video's that you post.
I had an idea regarding the changing of the i8 transmission fluid so that you don't need to remove the stiffening plate each time.
The next time that you remove that plate, measure from the 4 most distant torx bolt holes (in 4 quadrants) in the body to the transmission drain plug. Then, with a hole saw, drill an appropriate size hole in the stiffening plate at the location of the drain plug, located by using those measurement's on the same 4 bolt holes on the plate before reinstalling the plate. I don't think that the hole would have a structural impact on the plate. You could even make a cover for the hole in the plate to keep out debris.
What do you think?
|