Last night, I tried to Vehicle Order (VO) code the VSG out by removing the
4U9 option and then FDL coding the ECUs to defaults. All this did was make the VSG essentially sound like a skipping CD player (remember those?). What I
did not do was physically unplug the speaker at this point because I don't know where it's located. @Eye3, you may try this to see if that resolves the issue.
If not, I'm still not clear on exactly what to FDL code to get the following results:
- No noise output from the VSG speaker at startup
- No dash or failure indication
In an ideal world- There would be a setting to enable/disable in iDrive
- That setting would be memorized
- When the VSG is disabled there would be no warning/malfunction
I'll add that to my knowledge thus far, there are 2x VSG modules with their own settings and also VSG settings within the HU_NBT2 module. I just grabbed the CAFD files last night so haven't had a chance to peruse them offline.