[WABIM66]

Has anyone installed front plates on their MY23 yet? I asked the CA about installation and he mentioned they install on the front end with "some required tweaking". Not certain I will fancy any experimental drilling or anything into the grill or any points on the front end. Especially if the sensors may be impacted.

I did some surfing and found two options. Other companies offered for MY23, but have been sold out.

1) RHO-Plate V2. This company only lists compatibility up to 2022 G26.

2) Platypus Mount for 2020-2023 BMW 4/i4 Series. This US based company lists for 2020-2023 BMW 4 & i4. But while many purchasers will not normally provide reviews on the manufacturers site, I could not find any MY23 G26 i4 owner reviews.

This is a front plate required state, am thinking of purchasing one of each for the tow hook location in case one does not work out. Both ballpark $100-125 or so new. Need to go to dealership try to compare tow hook locations between 22 & 23 models.

[WABIM66]

Sorry everyone, believe it or not, my forum search feature finally started to work. Found a couple of references including on from europeanstyle plates. I doubt it, but if the euro style turns out to be legal here, I may consider that route, if not looks as though the tow hook options will be the choice. Have a good day.

[note46]

I got the Rho plate v2 with the drop down extension. Works fine on my 2022 i4 eD40 M Sports. There is no difference on the front bumper for the i4 between 22 /23 MY so it should work fine.

[xaos]

I have the RHO-Plate V2 on my 2022, and it looks and works great. I have DAPP and PAP and neither are impacted. I can't imagine there being any changes with the 2023 model which would impact the use of this.

[WER2XU]

Over 20 years of living in states which require it and I just leave it off, no issues...i use zip ties for the annual inspection.

[WABIM66]

note46 . Would that be the "Extender Narrow" accessory?.
Good to know xaos did you adjust the angle pitch?

[note46]

Originally Posted by WABIM66

note46 . Would that be the "Extender Narrow" accessory?.
Good to know xaos did you adjust the angle pitch?

Yup that's the correct one.

[xaos]

Originally Posted by WABIM66

note46 . Would that be the "Extender Narrow" accessory?.
Good to know xaos did you adjust the angle pitch?

Absolutely. I have it angled to match the angle of the front end, otherwise it looks really awkward.

[jpuffmasterpuffpuffpuff69]

I figure the actual tow hook plus some zip ties through screw holes should get the job done with a bit of tweaking.

[WABIM66]

Cool xaos, and pretty color as well. Thanks!

[WABIM66]

Originally Posted by jpuffmasterpuffpuffpuff69

I figure the actual tow hook plus some zip ties through screw holes should get the job done with a bit of tweaking.

That photo will be worth seeing!

[jpuffmasterpuffpuffpuff69]

Originally Posted by WABIM66

That photo will be worth seeing!

Indeed. Probably will never happen though. I almost never run a front plate anymore. Just for ugly vehicles like our Forester.

[gs6456]

I've gone with the "I'm going to occasionally get a ticket" option.

[jpuffmasterpuffpuffpuff69]

Originally Posted by gs6456

I've gone with the "I'm going to occasionally get a ticket" option.

That'd be a pain in the butt while travelling and possibly have extra fees. I've managed to go ticketless for over 8 years now.

[jplev]

I just picked up an i4 xDrive40. Living in a state that requires a front plate, I reluctantly probably should install it. I saw some options in this thread do not require drilling. I did not see this one though, wonder if anyone else has tried it...

https://torkliftcentral.com/the-law-...-plate-bracket

[kindofblue]

Originally Posted by jplev

I just picked up an i4 xDrive40. Living in a state that requires a front plate, I reluctantly probably should install it. I saw some options in this thread do not require drilling. I did not see this one though, wonder if anyone else has tried it...

https://torkliftcentral.com/the-law-...-plate-bracket

That's actually a nice looking option. I've bookmarked it, thanks.

[jplev]

I reached out to the company. They are working on a version that will work with i4's equipped with DAPP. I am waiting to hear availability. They sent me a link to a video showing this new version (not sure if in final form)...

YouTube Video: Front Plate Mount for i4 with DAPP

[motzus]

Originally Posted by jplev

I reached out to the company. They are working on a version that will work with i4's equipped with DAPP. I am waiting to hear availability. They sent me a link to a video showing this new version (not sure if in final form)...

YouTube Video: Front Plate Mount for i4 with DAPP

They have the final version out. You can order it from there web site. They sent me an email yesterday. Unfortunately I drilled my bumper last week to install the front plate holder that was in my trunk.

[jplev]

The company emailed me last night also confirming the latest version is out. The wait time though is 4-6 weeks. I ended up doing the same thing and having the real license plate mount installed.

[awaitingbimmer]

I am considering getting something. Been driving 6 months in California hoping I don't get pulled over.

[Drewzer4455]

This is what I use.
Does not interfere with DAPP.
No drill, does not use tow hook, very secure, almost flush with the car.
https://www.slybrackets.com/store/SL...LLE-p544572582

[kindofblue]

I'm not quite sure why folks are worried about drilling holes to attach the front bumper plate. BMW dealers do this routinely when requested and if I decide to put the front plate on I'd probably go that route.