01-23-2022, 09:22 AM | #2 |
Moderator
616
Rep 10,854
Posts |
Yikes! What happened to cause the wires to fry?
__________________
My recent ED photos: http://f80.bimmerpost.com/forums/sho....php?t=1026808
my not-so-recent ED: http://www.e90post.com/forums/showthread.php?t=31829 Please join BMWCCA http://bmwcca.org/index.php?pageid=c...&ref_by=300279 |
Appreciate
0
|
01-24-2022, 06:06 AM | #3 |
New Member
5
Rep 20
Posts |
Who knows... here's the current list of faults
Again, if you know anybody in London that can help... Modules with faults: INSTRUMENT CLUSTER (KOMBI) (KOMB01) 27 Faults E1145C No message (display, engine speed, drive train, 0xF3), receiver instrument cluster, transmitter DME/DDE E1145E No message (data, drive train, 0x3F9), receiver instrument cluster, transmitter DME/DDE E11460 No message (data, display, transmission powertrain, 0x3FD), receiver KOMBI, transmitter EGS/DKG/EME E12C10 Signal (data, display transmission powertrain, 0x3FD) invalid, transmitter EGS/DKG/EME E1147A No message (status, engine fuel consumption, 0x2C4), receiver KOMBI, transmitter DME / DDE E11546 No message (wheel torque, powertrain 1, 0x8F), receiver instrument cluster, transmitter DME/DDE B7F667 INSTR. CL.: storage of system time faulty E11498 No message (status, automatic engine start-stop function, 0x30B), receiver KOMBI, transmitter DME / DDE E12C24 Signal (status driving light, 0x314) invalid, transmitter JBE / BDC E11421 INSTR. CL.: message, demand-based service, message from CBS user has failed B7F68C Instrument panel: Selector lever indication, shift point indicator, CAN messages faulty E114CE No message (torque, crankshaft 1, 0xA5), receiver instrument cluster, transmitter DME/DDE E11558 No message (powertrain output display, 0x2AE), receiver instrument cluster, transmitter DME/DDE E114D8 Message (display condition, hybrid, 0x3AD) missing, receiver instrument panel, transmitter EME E11467 No message (angle of accelerator pedal, 0x0D9), instrument panel receiver, DME/DDE transmitter E11509 No message (load status 2, 0x2FA), receiver KOMBI, transmitter EME E1150A No message (system status, electrical vehicle motor, 0x308), receiver KOMBI, transmitter DME E1150B No message (range calculation data, 0x32B), receiver KOMBI, transmitter EME E1150C No message (range calculation data 2, 0x201), receiver KOMBI, transmitter EME E1150F No message (data, high-voltage battery unit 2, 0x239), receiver KOMBI, transmitter SME E1150D No message (status, load interface, 0x3B4), receiver KOMBI, transmitter SLE E11508 No message (load status, 0x3E9), receiver KOMBI, transmitter EME E114EF No message (data, high-voltage battery unit, 0x431), receiver KOMBI, transmitter SME E1150E No message (mode, voltage-controlled, 0x432), receiver KOMBI, transmitter SME E11511 Message (crash control, 0x19B) missing, receiver KOMBI, transmitter ACSM E11500 No message (configuration, SOC Hold, 0x350), receiver KOMBI, transmitter DME/DDE B7F6E3 HUD: Fault in communication, HUD does not respond ELECTRONIC TRANSMISSION CONTROL (EGS) (GSAW01) 21 Faults CF14B1 No message (wheel torque 1, 0x8F), receiver EGS, transmitter DME/DDE CF1401 No message (crankshaft torque 1, 0xA5), receiver EGS, transmitter DME/DDE CF1411 No message (crankshaft torque 2, 0xA6), receiver EGS, transmitter DME/DDE CF1421 No message (crankshaft torque 3, 0xA7), receiver EGS, transmitter DME/DDE CF1451 No message (accelerator pedal angle, 0xD9), receiver EGS, transmitter DME/DDE CF1481 No message (wheel torque 3, 0x145), receiver EGS, transmitter DME/DDE CF14C1 No message (status MSA, 0x30B), receiver EGS, transmitter DME/DDE CF1461 No message (OBD status, 0x397), receiver EGS, transmitter DME/DDE CF1441 No message (drive train 2, 0x3F9), receiver EGS, transmitter DME/DDE CF1431 No message (drive train 1, 0x3FB), receiver EGS, transmitter DME/DDE CF14E1 No message (data, drive train 4, 0x1FC), receiver EGS, transmitter DME/DDE CF2A21 No message (power management, low-voltage, 0x3C9), receiver EGS, transmitter DME/DDE CF14A1 No message (drive train secured, 0x1D0), receiver EGS, transmitter DME/DDE CF1571 No message (data, prediction operating strategy, 0xFE), receiver EGS, transmitter DME/DDE CF2901 No message (data, position, drive train, 0x212), receiver EGS, transmitter EME CF2A01 No message (predefine high-voltage battery, 0x433) receiver EGS, transmitter EME CF2A11 No message (status, electric motor, traction, long-term, 0x192), receiver EGS, transmitter EME CF2BA1 No message (data, actuation, drive train, 0x28D, A-CAN), receiver EGS, transmitter EME CF2BB1 No message (data, actuation, drive train, 0x28D, FA-CAN), receiver EGS, transmitter EME CF1701 No message (status gear selector switch, 0x197): receiver EGS, transmitter GWS CF2B01 No message (status, high-voltage battery unit, 0x112), receiver EGS, transmitter SME DIGITAL MOTOR ELECTRONICS (DME) (DME_BX8) 20 Faults CDA67A Message (status of e-motor traction, long-term, 0x192) not current, receiver DME, transmitter EME 1F140B Drive, safety function: Torque of drive electronics implausible CD9449 No message (actual data, electric motor, traction, 93.0.2), receiver DME, transmitter EME CDA432 No message (operating mode, speed, torque, hybrid, 73.0.2), receiver DME, transmitter EME CDC203 No message (status of high-voltage battery unit, 0x112), receiver DME, transmitter SME CDBA3A No message (EME operating strategy request, 73.2.1), receiver DME, transmitter EME CD9462 No message (predefined torque, operating strategy, 94.1.2), receiver DME, transmitter DSC CDA521 No message (predefined torque, operating strategy/predefined torque, 73.0.2), receiver DME, transmitter EME 21A01E Emergency run manager information: Electronics motor failure detected 108B03 Temperature sensor engine compartment, signal: Temperature too high 1B5202 Supply, terminal 15N_1: Short circuit to ground 1B5402 Supply, terminal 15N_3: Short circuit to ground 1B5302 Supply, terminal 15N_2: Short circuit to ground CD8B05 No message (alternating current status, 125.0.2), receiver DME, transmitter EME CDBA27 Message (actual data charging electronics, 0x108) missing, receiver DME, transmitter EME 160502 Engine ventilation heating, activation Short circuit to ground CD9463 No message (status, electric motor, traction, 238.1.2), receiver DME, transmitter EME CD9464 No message (status, electric motor, traction, 94.0.2), receiver DME, transmitter EME CDA587 Signal (display data, transmission train, 0x3FD) transmitter EGS CDA640 Message (status of e-motor traction, long-term, 0x192) missing, receiver DME, transmitter EME BODY DOMAIN CONTROLLER (BDC) (BDC) 19 Faults 804091 Driver KL15: short circuit to B+ 80409B Driver KL15N2: Break in wiring or short circuit to B+ 8040B1 Wake-up line to the intelligent battery sensor IBS: Short circuit to B+ or line disconnection 804293 Windscreen wiper: Blocking 80436A Auxiliary coolant pump: Line disconnection or short circuit to B+ 804954 Right fuel level sensor: Short circuit to B+ or line disconnection D90D07 Driver's door switch block: missing LIN component D90D0A Exterior mirror, left (LIN): No LIN-slave D90D0D Exterior mirror, right (LIN): No LIN-slave D90D20 Front wiper (LIN): No LIN-slave D90D29 Rain-light-solar-condensation sensor: Missing LIN slave D90D38 Interior lighting unit (ILE): No LIN-slave D914A5 No message (crankshaft torque 1, 0xA5), receiver BDC, transmitter EDME D915B9 No message (heat management, engine control, 0x1B9), receiver BDC, transmitter DME/DDE D915D0 Message (drive train protection, 0x1D0) missing, receiver BDC, transmitter DME/DDE D91681 No message (vehicle electrical system voltage value, 0x281), receiver BDC, transmitter DME/DDE D917B3 No message (power management, electric load control, 0x3B3), receiver BDC, transmitter DME/DDE D917F9 No message (data, drive train 2, 0x3F9), receiver BDC, transmitter DME/DDE D91FF9 Message (drive train data 2, ID 230.0.2) missing, receiver BDC, transmitter DME/DDE DYNAMIC STABILITY CONTROL (DSC) (DSC_I1) 19 Faults 480A88 Brake pedal travel sensor: Signal line 1, short circuit to B+ 480A87 Brake pedal travel sensor: Signal line 2, open circuit or short circuit to ground D3557A Signal (powertrain 4 wheel torque, 40.3.4) invalid, transmitter DME / DDE / EDME D3545D Message (engine control, brake system data, 102.0.2) missing, receiver DSC, transmitter EME D35570 No message (powertrain 4 wheel torque, 40.3.4), receiver DSC, transmitter DME / DDE / EDME D35B3F No message (powertrain 5 wheel torque, 40.3.4), receiver DSC, transmitter DME / DDE / EDME D358E1 No message (crankshaft 1 torque, 40.1.4), receiver DSC, transmitter DME / DDE / EDME D3556D No message (powertrain 3 wheel torque, 61.3.4), receiver DSC, transmitter DME / DDE / EDME D3568A No message (wheel torque, powertrain, electrified all-wheel drive 1, 61.1.4), receiver DSC, transmitter DME/DDE D3568B No message (wheel torque, powertrain, electrified all-wheel drive 2, 61.1.4), receiver DSC, transmitter DME/DDE D356A3 No message (wheel torque, powertrain, electrified all-wheel drive 3, 75.1.4), receiver DSC, transmitter DME/DDE D356AA No message (electric motor start power status, 117.1.2), receiver DSC, transmitter DME / DDE / EDME D35744 No message (drive train 2 data, 230.0.2), receiver DSC, transmitter DME / DDE / EDME D3569B Message (OBD engine diagnosis, 247.1.2) missing, receiver DSC, transmitter RDME D35452 No message (drive train 3 data, 251.1.4), receiver DSC, transmitter DME / DDE / EDME D35A08 No message (powertrain 6 wheel torque, 61.3.4), receiver DSC, transmitter DME / DDE / EDME D35558 No message (powertrain 2 wheel torque, 41.3.4), receiver DSC, transmitter DME / DDE / EDME D35755 Message (specification, parametrisation, I-brake/HDC, 60.1.4) missing, receiver DSC, transmitter SAS D35586 No message (rain sensor-wiper speed, 256.1.4), receiver DSC, transmitter BDC-ZGM INTEGRATED AUTOMATIC HEATING / AIR CONDITIONING SYSTEM (IHKA) (IHX_I1) 11 Faults E71406 Message (data, drive train 2 , 0x3F9): receiver IHKA, transmitter DME / DDE E7140E Message (torque for crankshaft 1, 0xA5): receiver IHKA, transmitter EDME E7142B No message (power management, consumer control, 0x3B3): receiver IHKA, transmitter EDME E7143C Message (status, high-voltage accumulator 1, 0x1FA): receiver IHKA, transmitter SME E71442 No message (status, auto engine start, 0x30B): receiver IHKA, transmitter DME E7144C Message (status, valve, high-voltage battery cooling, 0x389): receiver IHKA, transmitter EDME E71452 Message (control, A/C compressor, 0x38C): receiver IHKA, transmitter EME E71458 No message (heat management, engine control, 0x1B9): receiver IHKA, transmitter DME / DDE E70C30 Electric A/C compressor: does not respond 80124D Electric A/C compressor: Electric A/C compressor switched-off due to an implausible signal to the refrigerant shutoff valve E70C3A Electric auxiliary heater: EDH does not respond OPTIONAL EXTRA SYSTEM (sas_i1) 6 Faults D19570 Message (wheel torque, electric motor 4, 40.3.4) missing, receiver SAS, transmitter EDME D1957A Signal (drive 4 wheel torque, 40.3.4) invalid, transmitter EDME / DME/DDE D19646 Message (accelerator pedal angle, 40.1.4) missing, receiver SAS, transmitter EDME D19744 Message (drive train data 2, 230.0.2) missing, receiver SAS, transmitter EDME D19A08 Message (wheel torque, electric motor 6, 61.3.4) missing, receiver SAS, transmitter EDME D19B3F Message (wheel torque, electric motor 5, 40.3.4) missing, receiver SAS, transmitter EDME ACTIVE SOUND DESIGN (ASD) (ASD_I12) 5 Faults D8D400 Message (powertrain data 2, 0x3F9) missing, received by ASD, transmitted by EDME 8053B2 Speaker 1 exhaust system - coil 1: Malfunction D8D401 Message (crankshaft torque 1, 0xA5) missing, received by ASD, transmitted by EDME D8D405 Message (accelerator pedal angle, 0xD9) missing, received by ASD, transmitted by EDME D8D406 Message (sound control engine data, 0x15E) missing, received by ASD, transmitted by EDME ELECTROMECHANICAL POWER STEERING (EPS) (EPS_TK02) 4 Faults D51744 No message (drive train data 2, 230.0.2), receiver EPS, transmitter DME / DDE D51C1B No message (power generation status, 232.1.2), receiver EPS, transmitter DME / DDE D51C1F No message (specification, power, electrical, 232.0.2) receiver EPS, transmitter DME / DDE D50420 EPS, FlexRay: Communications fault PARKING ASSISTANT (PMA) (PMA_15) 3 Faults D414A9 No message (fault code memory, vehicle electrical system, voltage, 104.0.1), receiver PMA, transmitter DME/DDE D41744 No message (data drive train 2, 230.0.2), receiver PMA, transmitter DME/DDE D419AB Signal (drive train data 2, 230.0.2) invalid, transmitter DME / DDE PARKING BRAKE (EMF) (EMF_10) 3 Faults D39570 No message (wheel torque, powertrain 4, DC), receiver EMF, transmitter DME / DDE D3957A Signal (powertrain 4 wheel torque, 0xDC) invalid, transmitter DME / DDE D39744 No message (data, drive train 2, 3F9), receiver EMF, transmitter DME/DDE CRASH SAFETY MODULE (ACSM) (ACSM) (ACSM4I) 3 Faults 930BE0 Switch-off, high-voltage system: Short circuit to negative 930BE6 Switch-off, high-voltage system 2: Short circuit to B+ C95409 No message (data for drive train 2, 0x3F9), receiver ACSM, transmitter DME/DDE GEAR LEVER SWITCH (GWS) (GWS2) 3 Faults 802696 Undervoltage E0AC00 Interface EGS (data display transmission, 0x3FD): Signal invalid E0AC20 Interface EGS (data display transmission, 0x3FD): Signal invalid CAMERA BASED DRIVER ASSIST. SYSTEMS (KAFAS) (KAFAS20) 2 Faults E06C43 Signal (warning object coordination status, 0x21F) invalid, transmitter DSC / ICM E06C44 Signal (warning object coordination status, 0x21F) invalid, transmitter DSC / ICM PRESSURIZED FUEL TANK CONTROL MODULE (TFE) (TFM_I1) 2 Faults D04C1E LIN, communications (fuel tank pressure sensor): Missing D0540F Message (Diagnosis OBD engine, 0x397) missing, Receiver TFE, Transmitter DME ALL-ROUND VISION CAMERA (TRSVC) (ICAM_F15) 2 Faults CA940A No message (drive train 2 data, 0x3F9), receiver TRSVC, transmitter DME / DDE CAAC0A Signal (drive train data, 0x3F9) invalid, transmitter DME / DDE HU-H (MMI) (NBT) 1 fault E1CC03 Message (drive train 2 data, 0x3F9) missing, receiver HU-H, transmitter DME/DDE TOUCHBOX (TBX) (TBX5_01) 1 fault 806182 TBX: Undervoltage |
Appreciate
0
|
01-24-2022, 04:32 PM | #5 |
Private First Class
16
Rep 152
Posts |
Somebody else here reported some error like this at the end it was some sort of quick soldering job to fix a connection.
My friend who is a dealer and had an i8 had a similar issue too |
Appreciate
0
|
01-25-2022, 02:09 PM | #6 |
New Member
5
Rep 20
Posts |
Thanks. This is actually the SECOND time it happened so you may be referring to me!
The problem now is that no indy will go near the HVB so I need somebody who has dealt with i8 before... just not a BMW service centre! The problem with the service centre is that they "replace" rather than "repair"! |
Appreciate
0
|
02-07-2022, 10:31 AM | #8 |
Registered
0
Rep 3
Posts |
wire loom damage
In my case, (and at least one other case I found in searching) the wires were eaten through by a rat.
Here (USA) my comprehensive car insurance covered the $12K bill (I was going to cancel comp because it was so expensive, but for once procrastination paid off). I found another case where a used i8 had resoldered and sealed wires where similar damage had happened. If you're going to have to cover out of pocket, that might be a viable option if you can find the damage. Most of the cost was in labor, as the loom goes everywhere and they have to drop out the battery and the coolant lines. And probably other stuff. Also took two months as the new wiring had to be manufactured and then shipped from germany. |
Appreciate
0
|
09-21-2022, 01:18 PM | #9 |
Registered
0
Rep 3
Posts |
i have same situation. My EME in i3 was no communication. I search a company that repair EME. They fix my ECU, and now all ok.
Url for repair EME: https://bmw-power.com.ua/en/services...me-repair.html It is very fast and much cheaper than buy new unit |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|