[Rylan6100]

Parked up for months and now can't start or move.

DTC Description State System 800BE4 800BE2 21F0DF 1D3702 1F140B 234A09 CDBA33 CDBA35 CDA67A 21A117 CDA681 21A11F 21A11D 482E93 482E97 D19936 D19A62 22281C Front Camera: Blindness Identified Front Camera: Connection Fault High-Voltage Interlock Loop: Line Disconnection Power Management, Battery: Faulty Charge By High-Voltage Battery Drive, Safety Function: Torque Of Drive Electronics Implausible No Message (Secured, Short-Term Actual Data E-Motor 1, 0xCD), Receiver DME, Transmitter EME Message (Short-Term Data EMotor 1, 0xA8) Missing, Receiver DME, Transmitter EME Message (Status Data E-Motor 1, 0x29D) Missing, Receiver DME, Transmitter EME Message (Status Of E-Motor Traction, Long-Term, 0x192) Not Current, Receiver DME, Transmitter EME Information Emergency Operation Manager: Switch-On Requester Combustion Engine, Request EME Signal (Actual Data, Electrical Machine, 0xCD) Invalid, Transmitter EME Information Emergency Operation Manager: Deactivation Range Display Combustion Engine, Requester EME Information Emergency Operation Manager: Switch-Off Requester MSA, Request EME SAS: Voltage Supply - Local Undervoltage SAS: Voltage Supply - Global External Undervoltage Signal (Time/Date, 276.6.8) Invalid, Transmitter KOMBI Signal (Centre Of Gravity Lateral Acceleration, 55.0.2) Invalid, Transmitter DSC High-Voltage Power Management: High-Voltage System Not Started In Spite Of Request Intermittent Permanent Permanent Intermittent Permanent Permanent Permanent Permanent Permanent Intermittent Permanent Permanent Permanent Intermittent Intermittent Permanent Permanent Permanent TRSVC (All Round View Camera) TRSVC (All Round View Camera) SME (Accumulator Management Electronics) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) ECM (Engine Control Module- DME/DDE) SAS (Optional Extra System) SAS (Optional Extra System) SAS (Optional Extra System) SAS (Optional Extra System) EME2 (Electrical Machine Electronics 2)

222834 Permanent Charge Management Function: Check Control Message 804, Unable To Charge 222842 222816 222C06 222C07 22278B 2228DC 2228C1 D79421 D79422 D79498 D794A0 D7952E 222894 22289D 2228E2 2228E9 8040B9 8040BD Charge Management Function: Fault During The Charging Procedure High-Voltage Power Management: High-Voltage Interlock Loop, Circuit Interrupted EME, High-Voltage Interlock Loop, Signal: Short-Circuit/Open Circuit EME, High-Voltage Interlock Loop, Signal: Not Plausible Information From Safety Monitoring:Combustion Engine Switch-Off, REME Request Emergency Manager Information, REME: No Signal Charge Management Function: Timeout Of Initialisation Phase, Charging Electronics Do Not Start The Charging Procedure. Message (Prognosis For E-Motor Operating Range, 0x29C) Missing, Receiver EME, Transmitter REME No Message (Relative Time, 0x328), Receiver EME, Transmitter KOMBI Message (Status Of E-Motor Data, 0x29D) Not Current, Receiver EME, Transmitter REME Message (Status Of E-Motor Data, 0x29D) Missing, Receiver EME, Transmitter REME Message (Crankshaft Torque, 0xA5) Not Up To Date, Receiver EME, Transmitter DME Emergency Manager Information, REME: No Signal Emergency Manager Information, REME: No Signal Information Emergency Run Manager, Signal From REME: No Signal Information Emergency Run Manager, Signal From DME: No Signal De-Activation Of Terminal 30B: Top Startability Limit Reached Terminal 30F Reset Or Deactivated Intermittent EME2 (Electrical Machine Electronics 2) Intermittent Permanent Permanent Permanent Permanent Intermittent Intermittent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Intermittent EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) CAS (Car Access System CAS/FEM/BDC) CAS (Car Access System CAS/FEM/BDC)

804343 Permanent Washer Jet Heating: Break In Wiring Or Short Circuit To B+ 801A50 E06C0E E06C43 E12C51 801180 2228DC 222896 222898 222842 2228C1 222869 222626 SINE: Fault In Speaker Circuit Detected Signal (Time/Date Display, 0x2F8) Invalid, Transmitter KOMBI Signal (Warning Object Coordination Status, 0x21F) Invalid, Transmitter DSC / ICM Signal (Range Calculation Data 0x32B) Invalid, Transmitter EME Defroster Flap Motor (High Version) / Air Distribution Flap Motor (Basic Version): Specification Of Desired Position Failed Emergency Manager Information, REME: No Signal Information Emergency Run Manager, High-Voltage Starter Motor Generator: No Signal Information Emergency Run Manager, High-Voltage Starter Motor Generator: No Signal Charge Management Function: Fault During The Charging Procedure Charge Management Function: Timeout Of Initialisation Phase, Charging Electronics Do Not Start The Charging Procedure. Emergency Run Manager Information: Electrical Machine Deactivation EME: Internal Fault (Active Short Circuit Requested) CAS (Car Access System CAS/FEM/BDC) Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Permanent Intermittent Intermittent FZD (Function Center, Roof) KAFAS (Camera Based Driver Assist Systems) KAFAS (Camera Based Driver Assist Systems) IC (Instrument Cluster INSTR) AC (Air Conditioning - IHKA) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2) EME2 (Electrical Machine Electronics 2)

[Rylan6100]

Any help would be greatly appreciated

[Javaq]

Was the car plugged in charger when stationary?

[Rylan6100]

Originally Posted by Javaq

Was the car plugged in charger when stationary?

No it wasn't. Had to make an emergency trip left it there when I came back couldn't start and when I did a diagnostic those were the codes that came up

[ChiTownM]

The first thing to comes to mind is the regular battery may be flat or dead. Did you plug the charger in to see if that makes a difference? You may need to replace the battery, not referring to the hybrid batteries.

[Rylan6100]

12v battery was changed..however when I plug in the charger for the hv it starts charging but after a min or 2 it says unable to charge

[Rylan6100]

On the hv battery I'm getting 362v

[tommyb13662]

My 2016 died my issue was the battery safety module in the battery box. It died and then killed 3/6 cells. It was all replaced under the battery warranty so you should be covered also.

[tommyb13662]

Any updates?

[Rylan6100]

Nothing much car has a crash code which shuts down the car and put it into a safe mode disabling the reme module but it was never crashed..still looking to see if I get it sorted