Forum for the entire range of BMW electric vehicles
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW i8 Forums BMW i8 General Discussion

Post Reply
 
Thread Tools Search this Thread
      01-23-2022, 02:52 AM   #1
randelissimo
New Member
5
Rep
20
Posts

Drives: I8 2015
Join Date: Oct 2020
Location: London

iTrader: (0)

Do you know of an independent garage that can fix/replace a BMW i8 wire loom

I'm out of warranty and it's desperate times as facing down an £18,000 bill!
Appreciate 0
      01-23-2022, 09:22 AM   #2
stressdoc
Moderator
stressdoc's Avatar
Dominica
616
Rep
10,854
Posts

Drives: BMW i8; Toy 4runner TRD pro
Join Date: Jun 2005
Location: Waco TX

iTrader: (0)

Yikes! What happened to cause the wires to fry?
Appreciate 0
      01-24-2022, 06:06 AM   #3
randelissimo
New Member
5
Rep
20
Posts

Drives: I8 2015
Join Date: Oct 2020
Location: London

iTrader: (0)

Who knows... here's the current list of faults

Again, if you know anybody in London that can help...

Modules with faults:
INSTRUMENT CLUSTER (KOMBI) (KOMB01) 27 Faults
E1145C No message (display, engine speed, drive train, 0xF3), receiver instrument cluster, transmitter DME/DDE
E1145E No message (data, drive train, 0x3F9), receiver instrument cluster, transmitter DME/DDE
E11460 No message (data, display, transmission powertrain, 0x3FD), receiver KOMBI, transmitter EGS/DKG/EME
E12C10 Signal (data, display transmission powertrain, 0x3FD) invalid, transmitter EGS/DKG/EME
E1147A No message (status, engine fuel consumption, 0x2C4), receiver KOMBI, transmitter DME / DDE
E11546 No message (wheel torque, powertrain 1, 0x8F), receiver instrument cluster, transmitter DME/DDE
B7F667 INSTR. CL.: storage of system time faulty
E11498 No message (status, automatic engine start-stop function, 0x30B), receiver KOMBI, transmitter DME / DDE
E12C24 Signal (status driving light, 0x314) invalid, transmitter JBE / BDC
E11421 INSTR. CL.: message, demand-based service, message from CBS user has failed
B7F68C Instrument panel: Selector lever indication, shift point indicator, CAN messages faulty
E114CE No message (torque, crankshaft 1, 0xA5), receiver instrument cluster, transmitter DME/DDE
E11558 No message (powertrain output display, 0x2AE), receiver instrument cluster, transmitter DME/DDE
E114D8 Message (display condition, hybrid, 0x3AD) missing, receiver instrument panel, transmitter EME
E11467 No message (angle of accelerator pedal, 0x0D9), instrument panel receiver, DME/DDE transmitter
E11509 No message (load status 2, 0x2FA), receiver KOMBI, transmitter EME
E1150A No message (system status, electrical vehicle motor, 0x308), receiver KOMBI, transmitter DME
E1150B No message (range calculation data, 0x32B), receiver KOMBI, transmitter EME
E1150C No message (range calculation data 2, 0x201), receiver KOMBI, transmitter EME
E1150F No message (data, high-voltage battery unit 2, 0x239), receiver KOMBI, transmitter SME
E1150D No message (status, load interface, 0x3B4), receiver KOMBI, transmitter SLE
E11508 No message (load status, 0x3E9), receiver KOMBI, transmitter EME
E114EF No message (data, high-voltage battery unit, 0x431), receiver KOMBI, transmitter SME
E1150E No message (mode, voltage-controlled, 0x432), receiver KOMBI, transmitter SME
E11511 Message (crash control, 0x19B) missing, receiver KOMBI, transmitter ACSM
E11500 No message (configuration, SOC Hold, 0x350), receiver KOMBI, transmitter DME/DDE
B7F6E3 HUD: Fault in communication, HUD does not respond
ELECTRONIC TRANSMISSION CONTROL (EGS) (GSAW01) 21 Faults
CF14B1 No message (wheel torque 1, 0x8F), receiver EGS, transmitter DME/DDE
CF1401 No message (crankshaft torque 1, 0xA5), receiver EGS, transmitter DME/DDE
CF1411 No message (crankshaft torque 2, 0xA6), receiver EGS, transmitter DME/DDE
CF1421 No message (crankshaft torque 3, 0xA7), receiver EGS, transmitter DME/DDE
CF1451 No message (accelerator pedal angle, 0xD9), receiver EGS, transmitter DME/DDE
CF1481 No message (wheel torque 3, 0x145), receiver EGS, transmitter DME/DDE
CF14C1 No message (status MSA, 0x30B), receiver EGS, transmitter DME/DDE
CF1461 No message (OBD status, 0x397), receiver EGS, transmitter DME/DDE
CF1441 No message (drive train 2, 0x3F9), receiver EGS, transmitter DME/DDE
CF1431 No message (drive train 1, 0x3FB), receiver EGS, transmitter DME/DDE
CF14E1 No message (data, drive train 4, 0x1FC), receiver EGS, transmitter DME/DDE
CF2A21 No message (power management, low-voltage, 0x3C9), receiver EGS, transmitter DME/DDE
CF14A1 No message (drive train secured, 0x1D0), receiver EGS, transmitter DME/DDE
CF1571 No message (data, prediction operating strategy, 0xFE), receiver EGS, transmitter DME/DDE
CF2901 No message (data, position, drive train, 0x212), receiver EGS, transmitter EME
CF2A01 No message (predefine high-voltage battery, 0x433) receiver EGS, transmitter EME
CF2A11 No message (status, electric motor, traction, long-term, 0x192), receiver EGS, transmitter EME
CF2BA1 No message (data, actuation, drive train, 0x28D, A-CAN), receiver EGS, transmitter EME
CF2BB1 No message (data, actuation, drive train, 0x28D, FA-CAN), receiver EGS, transmitter EME
CF1701 No message (status gear selector switch, 0x197): receiver EGS, transmitter GWS
CF2B01 No message (status, high-voltage battery unit, 0x112), receiver EGS, transmitter SME
DIGITAL MOTOR ELECTRONICS (DME) (DME_BX8) 20 Faults
CDA67A Message (status of e-motor traction, long-term, 0x192) not current, receiver DME, transmitter EME
1F140B Drive, safety function: Torque of drive electronics implausible
CD9449 No message (actual data, electric motor, traction, 93.0.2), receiver DME, transmitter EME
CDA432 No message (operating mode, speed, torque, hybrid, 73.0.2), receiver DME, transmitter EME
CDC203 No message (status of high-voltage battery unit, 0x112), receiver DME, transmitter SME
CDBA3A No message (EME operating strategy request, 73.2.1), receiver DME, transmitter EME
CD9462 No message (predefined torque, operating strategy, 94.1.2), receiver DME, transmitter DSC
CDA521 No message (predefined torque, operating strategy/predefined torque, 73.0.2), receiver DME, transmitter EME
21A01E Emergency run manager information: Electronics motor failure detected
108B03 Temperature sensor engine compartment, signal: Temperature too high
1B5202 Supply, terminal 15N_1: Short circuit to ground
1B5402 Supply, terminal 15N_3: Short circuit to ground
1B5302 Supply, terminal 15N_2: Short circuit to ground
CD8B05 No message (alternating current status, 125.0.2), receiver DME, transmitter EME
CDBA27 Message (actual data charging electronics, 0x108) missing, receiver DME, transmitter EME
160502 Engine ventilation heating, activation Short circuit to ground
CD9463 No message (status, electric motor, traction, 238.1.2), receiver DME, transmitter EME
CD9464 No message (status, electric motor, traction, 94.0.2), receiver DME, transmitter EME
CDA587 Signal (display data, transmission train, 0x3FD) transmitter EGS
CDA640 Message (status of e-motor traction, long-term, 0x192) missing, receiver DME, transmitter EME
BODY DOMAIN CONTROLLER (BDC) (BDC) 19 Faults
804091 Driver KL15: short circuit to B+
80409B Driver KL15N2: Break in wiring or short circuit to B+
8040B1 Wake-up line to the intelligent battery sensor IBS: Short circuit to B+ or line disconnection
804293 Windscreen wiper: Blocking
80436A Auxiliary coolant pump: Line disconnection or short circuit to B+
804954 Right fuel level sensor: Short circuit to B+ or line disconnection
D90D07 Driver's door switch block: missing LIN component
D90D0A Exterior mirror, left (LIN): No LIN-slave
D90D0D Exterior mirror, right (LIN): No LIN-slave
D90D20 Front wiper (LIN): No LIN-slave
D90D29 Rain-light-solar-condensation sensor: Missing LIN slave
D90D38 Interior lighting unit (ILE): No LIN-slave
D914A5 No message (crankshaft torque 1, 0xA5), receiver BDC, transmitter EDME
D915B9 No message (heat management, engine control, 0x1B9), receiver BDC, transmitter DME/DDE
D915D0 Message (drive train protection, 0x1D0) missing, receiver BDC, transmitter DME/DDE
D91681 No message (vehicle electrical system voltage value, 0x281), receiver BDC, transmitter DME/DDE
D917B3 No message (power management, electric load control, 0x3B3), receiver BDC, transmitter DME/DDE
D917F9 No message (data, drive train 2, 0x3F9), receiver BDC, transmitter DME/DDE
D91FF9 Message (drive train data 2, ID 230.0.2) missing, receiver BDC, transmitter DME/DDE
DYNAMIC STABILITY CONTROL (DSC) (DSC_I1) 19 Faults
480A88 Brake pedal travel sensor: Signal line 1, short circuit to B+
480A87 Brake pedal travel sensor: Signal line 2, open circuit or short circuit to ground
D3557A Signal (powertrain 4 wheel torque, 40.3.4) invalid, transmitter DME / DDE / EDME
D3545D Message (engine control, brake system data, 102.0.2) missing, receiver DSC, transmitter EME
D35570 No message (powertrain 4 wheel torque, 40.3.4), receiver DSC, transmitter DME / DDE / EDME
D35B3F No message (powertrain 5 wheel torque, 40.3.4), receiver DSC, transmitter DME / DDE / EDME
D358E1 No message (crankshaft 1 torque, 40.1.4), receiver DSC, transmitter DME / DDE / EDME
D3556D No message (powertrain 3 wheel torque, 61.3.4), receiver DSC, transmitter DME / DDE / EDME
D3568A No message (wheel torque, powertrain, electrified all-wheel drive 1, 61.1.4), receiver DSC, transmitter DME/DDE
D3568B No message (wheel torque, powertrain, electrified all-wheel drive 2, 61.1.4), receiver DSC, transmitter DME/DDE
D356A3 No message (wheel torque, powertrain, electrified all-wheel drive 3, 75.1.4), receiver DSC, transmitter DME/DDE
D356AA No message (electric motor start power status, 117.1.2), receiver DSC, transmitter DME / DDE / EDME
D35744 No message (drive train 2 data, 230.0.2), receiver DSC, transmitter DME / DDE / EDME
D3569B Message (OBD engine diagnosis, 247.1.2) missing, receiver DSC, transmitter RDME
D35452 No message (drive train 3 data, 251.1.4), receiver DSC, transmitter DME / DDE / EDME
D35A08 No message (powertrain 6 wheel torque, 61.3.4), receiver DSC, transmitter DME / DDE / EDME
D35558 No message (powertrain 2 wheel torque, 41.3.4), receiver DSC, transmitter DME / DDE / EDME
D35755 Message (specification, parametrisation, I-brake/HDC, 60.1.4) missing, receiver DSC, transmitter SAS
D35586 No message (rain sensor-wiper speed, 256.1.4), receiver DSC, transmitter BDC-ZGM
INTEGRATED AUTOMATIC HEATING / AIR CONDITIONING SYSTEM (IHKA) (IHX_I1) 11 Faults
E71406 Message (data, drive train 2 , 0x3F9): receiver IHKA, transmitter DME / DDE
E7140E Message (torque for crankshaft 1, 0xA5): receiver IHKA, transmitter EDME
E7142B No message (power management, consumer control, 0x3B3): receiver IHKA, transmitter EDME
E7143C Message (status, high-voltage accumulator 1, 0x1FA): receiver IHKA, transmitter SME
E71442 No message (status, auto engine start, 0x30B): receiver IHKA, transmitter DME
E7144C Message (status, valve, high-voltage battery cooling, 0x389): receiver IHKA, transmitter EDME
E71452 Message (control, A/C compressor, 0x38C): receiver IHKA, transmitter EME
E71458 No message (heat management, engine control, 0x1B9): receiver IHKA, transmitter DME / DDE
E70C30 Electric A/C compressor: does not respond
80124D Electric A/C compressor: Electric A/C compressor switched-off due to an implausible signal to the refrigerant shutoff valve
E70C3A Electric auxiliary heater: EDH does not respond
OPTIONAL EXTRA SYSTEM (sas_i1) 6 Faults
D19570 Message (wheel torque, electric motor 4, 40.3.4) missing, receiver SAS, transmitter EDME
D1957A Signal (drive 4 wheel torque, 40.3.4) invalid, transmitter EDME / DME/DDE
D19646 Message (accelerator pedal angle, 40.1.4) missing, receiver SAS, transmitter EDME
D19744 Message (drive train data 2, 230.0.2) missing, receiver SAS, transmitter EDME
D19A08 Message (wheel torque, electric motor 6, 61.3.4) missing, receiver SAS, transmitter EDME
D19B3F Message (wheel torque, electric motor 5, 40.3.4) missing, receiver SAS, transmitter EDME
ACTIVE SOUND DESIGN (ASD) (ASD_I12) 5 Faults
D8D400 Message (powertrain data 2, 0x3F9) missing, received by ASD, transmitted by EDME
8053B2 Speaker 1 exhaust system - coil 1: Malfunction
D8D401 Message (crankshaft torque 1, 0xA5) missing, received by ASD, transmitted by EDME
D8D405 Message (accelerator pedal angle, 0xD9) missing, received by ASD, transmitted by EDME
D8D406 Message (sound control engine data, 0x15E) missing, received by ASD, transmitted by EDME
ELECTROMECHANICAL POWER STEERING (EPS) (EPS_TK02) 4 Faults
D51744 No message (drive train data 2, 230.0.2), receiver EPS, transmitter DME / DDE
D51C1B No message (power generation status, 232.1.2), receiver EPS, transmitter DME / DDE
D51C1F No message (specification, power, electrical, 232.0.2) receiver EPS, transmitter DME / DDE
D50420 EPS, FlexRay: Communications fault
PARKING ASSISTANT (PMA) (PMA_15) 3 Faults
D414A9 No message (fault code memory, vehicle electrical system, voltage, 104.0.1), receiver PMA, transmitter DME/DDE
D41744 No message (data drive train 2, 230.0.2), receiver PMA, transmitter DME/DDE
D419AB Signal (drive train data 2, 230.0.2) invalid, transmitter DME / DDE
PARKING BRAKE (EMF) (EMF_10) 3 Faults
D39570 No message (wheel torque, powertrain 4, DC), receiver EMF, transmitter DME / DDE
D3957A Signal (powertrain 4 wheel torque, 0xDC) invalid, transmitter DME / DDE
D39744 No message (data, drive train 2, 3F9), receiver EMF, transmitter DME/DDE
CRASH SAFETY MODULE (ACSM) (ACSM) (ACSM4I) 3 Faults
930BE0 Switch-off, high-voltage system: Short circuit to negative
930BE6 Switch-off, high-voltage system 2: Short circuit to B+
C95409 No message (data for drive train 2, 0x3F9), receiver ACSM, transmitter DME/DDE
GEAR LEVER SWITCH (GWS) (GWS2) 3 Faults
802696 Undervoltage
E0AC00 Interface EGS (data display transmission, 0x3FD): Signal invalid
E0AC20 Interface EGS (data display transmission, 0x3FD): Signal invalid
CAMERA BASED DRIVER ASSIST. SYSTEMS (KAFAS) (KAFAS20) 2 Faults
E06C43 Signal (warning object coordination status, 0x21F) invalid, transmitter DSC / ICM
E06C44 Signal (warning object coordination status, 0x21F) invalid, transmitter DSC / ICM
PRESSURIZED FUEL TANK CONTROL MODULE (TFE) (TFM_I1) 2 Faults
D04C1E LIN, communications (fuel tank pressure sensor): Missing
D0540F Message (Diagnosis OBD engine, 0x397) missing, Receiver TFE, Transmitter DME
ALL-ROUND VISION CAMERA (TRSVC) (ICAM_F15) 2 Faults
CA940A No message (drive train 2 data, 0x3F9), receiver TRSVC, transmitter DME / DDE
CAAC0A Signal (drive train data, 0x3F9) invalid, transmitter DME / DDE
HU-H (MMI) (NBT) 1 fault
E1CC03 Message (drive train 2 data, 0x3F9) missing, receiver HU-H, transmitter DME/DDE
TOUCHBOX (TBX) (TBX5_01) 1 fault
806182 TBX: Undervoltage
Appreciate 0
      01-24-2022, 01:42 PM   #4
mwhfgjvcg
New Member
2
Rep
11
Posts

Drives: I8
Join Date: Oct 2021
Location: Switzerland

iTrader: (0)

Just curious, whats the model year?
Appreciate 0
      01-24-2022, 04:32 PM   #5
thesubmitter
Private First Class
Canada
16
Rep
152
Posts

Drives: Tesla M3 BMW i8 Acura MDX
Join Date: Feb 2020
Location: Canada

iTrader: (0)

Somebody else here reported some error like this at the end it was some sort of quick soldering job to fix a connection.

My friend who is a dealer and had an i8 had a similar issue too
Appreciate 0
      01-25-2022, 02:09 PM   #6
randelissimo
New Member
5
Rep
20
Posts

Drives: I8 2015
Join Date: Oct 2020
Location: London

iTrader: (0)

Thanks. This is actually the SECOND time it happened so you may be referring to me!

The problem now is that no indy will go near the HVB so I need somebody who has dealt with i8 before... just not a BMW service centre!

The problem with the service centre is that they "replace" rather than "repair"!
Appreciate 0
      01-26-2022, 08:25 AM   #7
F5506m
Second Lieutenant
48
Rep
281
Posts

Drives: 2019 i8
Join Date: Jul 2016
Location: New Jersey

iTrader: (0)

That is in all industries, no one wants to repair anything.
Appreciate 0
      02-07-2022, 10:31 AM   #8
wll64
Registered
0
Rep
3
Posts

Drives: bmw i8
Join Date: May 2021
Location: bay area, CA

iTrader: (0)

wire loom damage

In my case, (and at least one other case I found in searching) the wires were eaten through by a rat.

Here (USA) my comprehensive car insurance covered the $12K bill (I was going to cancel comp because it was so expensive, but for once procrastination paid off).

I found another case where a used i8 had resoldered and sealed wires where similar damage had happened. If you're going to have to cover out of pocket, that might be a viable option if you can find the damage.

Most of the cost was in labor, as the loom goes everywhere and they have to drop out the battery and the coolant lines. And probably other stuff. Also took two months as the new wiring had to be manufactured and then shipped from germany.
Appreciate 0
      09-21-2022, 01:18 PM   #9
bmwiuser
Registered
0
Rep
3
Posts

Drives: BMW I3
Join Date: Sep 2022
Location: Spain

iTrader: (0)

Wink

i have same situation. My EME in i3 was no communication. I search a company that repair EME. They fix my ECU, and now all ok.
Url for repair EME: https://bmw-power.com.ua/en/services...me-repair.html

It is very fast and much cheaper than buy new unit
Appreciate 0
      09-21-2022, 01:20 PM   #10
bmwiuser
Registered
0
Rep
3
Posts

Drives: BMW I3
Join Date: Sep 2022
Location: Spain

iTrader: (0)

sorry, i read that you have problem with wires, not EME
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 03:00 PM.




bmw
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST