[Vince1to1]

Hello,
I have coded TLA, unfortunately, after activating the DAP, I get the Check Control message „TLA is Not available in this country“(Switzerland). TLA works perfectly. Does anyone have any idea what else to code?
Greetings from Switzerland

[techwhiz1]

Originally Posted by Vince1to1

Hello,
I have coded TLA, unfortunately, after activating the DAP, I get the Check Control message „TLA is Not available in this country“(Switzerland). TLA works perfectly. Does anyone have any idea what else to code?
Greetings from Switzerland

What is needed for TLA?

[TorontoRando]

Are you saying that TLA works, but you get that message every time?

If so, sorry, I don't have an answer. However, please tell us how you were able to do this. I've been looking at enabling TLA (as well as auto speed adjustment, amongst other things) in my car since I got it. Thanks!

[Vince1to1]

Originally Posted by TorontoRando

Are you saying that TLA works, but you get that message every time?

If so, sorry, I don't have an answer. However, please tell us how you were able to do this. I've been looking at enabling TLA (as well as auto speed adjustment, amongst other things) in my car since I got it. Thanks!

Coded with esys following

Geschwindigkeit
SAS3/3000 FAS1/C_SLA_aSLA_Land_aktiv
Werte auf FF, FF, FF, FF

DDC_BSR2/3040/C_SLA_aSLA_Land_akti
Werte auf FF, FF, FF, FF


Ampel
SAS3/3000 FAS1/C_SLA_UCC_Land_aktiv
Werte auf FF, FF, FF, FF

SAS3/3000 FAS1/C_SLA_aUCC_Land_aktiv
Werte auf FF, FF, FF, FF

[TorontoRando]

Amazing! So it works, but shows that message every time you activate DAP? Which other driver assistance features have you coded in by the way?

I’m pretty sure you’re the first person to figure this out. Thank you!

[sd_dracula]

I can see TLA is already active on the car settings but disabled for my country.
What version of esys and other software did you use, I only see these ones.
You can try to code some of the following, that's how I enabled TLA on my G20 a few years back, let us know how it goes.

[techwhiz1]

I'll have to code this in BimmerUtility when I get home from vacation.

[TorontoRando]

Originally Posted by techwhiz1

I'll have to code this in BimmerUtility when I get home from vacation.

Please let us know if you get it to work? I don’t have eSys, so a BimmerUtility method would be best perfect!

[TorontoRando]

Originally Posted by Vince1to1

Coded with esys following

Geschwindigkeit
SAS3/3000 FAS1/C_SLA_aSLA_Land_aktiv
Werte auf FF, FF, FF, FF

DDC_BSR2/3040/C_SLA_aSLA_Land_akti
Werte auf FF, FF, FF, FF


Ampel
SAS3/3000 FAS1/C_SLA_UCC_Land_aktiv
Werte auf FF, FF, FF, FF

SAS3/3000 FAS1/C_SLA_aUCC_Land_aktiv
Werte auf FF, FF, FF, FF

I ended up getting BimmerUtility just to try this. I was able to code SAS3/3000 FAS1/C_SLA_aSLA_Land_aktiv, and SAS3/3000 FAS1/C_SLA_UCC_Land_aktiv, but I wasn't able to find a DDC module at all, and I couldn't find C_SLA_aUCC_Land_aktiv in SAS3/3000 FAS1 They don't seem to have caused any problems based on a short test drive, but also no new functionality.

techwhiz1 any luck on your end?

[JoB01]

I figured this out- bimmerutility (iPad/iphone version) won’t show certain values in the ecu’s. You have to use esys to get to the ucc and some of the asla options that make tla work. I was able to successfully code it active though.

[mlanes01]

Originally Posted by JoB01

I figured this out- bimmerutility (iPad/iphone version) won’t show certain values in the ecu’s. You have to use esys to get to the ucc and some of the asla options that make tla work. I was able to successfully code it active though.

Which esys launcher are you using?

[TorontoRando]

JoB01 I'd love to know as well; I wonder if the PC version of BimmerUtility works. Otherwise, which eSys launcher did you use? Thanks!

[TorontoRando]

JoB01 I tried to do this via Windows BimmerUtility, but that didn't work, because it presents the same options as Android (missing aUCC, for example). I tried to use eSys using this guide: https://www.bimmerfest.com/threads/c...-links.983244/, which uses eSys 3.39.1, and PSdZ Lite 4.37.31, but I can't get eSys to work. When I click connect, it gives me an error related to FA Master or something.

If you have any ideas, please let me know. Thank you!

[JoB01]

Originally Posted by TorontoRando

JoB01 I tried to do this via Windows BimmerUtility, but that didn't work, because it presents the same options as Android (missing aUCC, for example). I tried to use eSys using this guide: https://www.bimmerfest.com/threads/c...links.983244/, which uses eSys 3.39.1, and PSdZ Lite 4.37.31, but I can't get eSys to work. When I click connect, it gives me an error related to FA Master or something.

If you have any ideas, please let me know. Thank you!

I do! My pm box is full- once I clear out some space, I’ll send you a pm with some details

[TorontoRando]

Originally Posted by JoB01

I do! My pm box is full- once I clear out some space, I’ll send you a pm with some details

Thank you! I’d really appreciate that!

[dadaabmw]

Originally Posted by JoB01

I do! My pm box is full- once I clear out some space, I’ll send you a pm with some details

If there's a working eSys with launcher, can you please PM me too?

[JoB01]

Originally Posted by dadaabmw

If there's a working eSys with launcher, can you please PM me too?

Head on over to this thread and ask Shawn Sheridan nicely… he’ll get you squared away-

https://www.bimmerpost.com/forums/sh....php?t=1673049

[dadaabmw]

Originally Posted by Vince1to1

Coded with esys following

Geschwindigkeit
SAS3/3000 FAS1/C_SLA_aSLA_Land_aktiv
Werte auf FF, FF, FF, FF

DDC_BSR2/3040/C_SLA_aSLA_Land_akti
Werte auf FF, FF, FF, FF


Ampel
SAS3/3000 FAS1/C_SLA_UCC_Land_aktiv
Werte auf FF, FF, FF, FF

SAS3/3000 FAS1/C_SLA_aUCC_Land_aktiv
Werte auf FF, FF, FF, FF

Did this enable it for you? I was able to code these with BU, enabled in Settings but did not actually work.